Put the gasket on and then the back plate after they are properly aligned. Put back the back bearing and align them together using the align rod.Į. Put some air tool oil on the vanes to make them smooth.ĭ. Align the air motor properly and put it inside the air motor casing. Put the hammer assembly inside the air impact wrench body followed by the front bearing and then the air motor casing.Ĭ. Attach the anvil with the hammer with the help of the gasket.ī. Put them all back together by going in the reverse direction of the process mentioned aboveĪ.
Clean them properly with petrol or any other spirit to remove any solidified oil or metal chips that may be present. Now you can see all the internal parts of the air impact wrench and also the body of the air impact wrench tool. Remove this gasket carefully with a screwdriver. There is a round gasket that holds the hammer and the anvil together. Push the anvil from the front to remove the hammer along with the anvil.
Husky airtool oil full#
When the full air side of the equipment is removed, now its time to remove the hammer assembly. Tap the anvil from the front to remove the air motor casing and the front bearings subsequently. Step 6: Remove Air Motor Housing & Front Bearing The vanes need to be cleaned after dis-assembly. The air motor has vanes in its grooves which cause the motor actions. Remove the air motor that becomes visible after the back bearing is removed. Put a slight tap on the anvil using a punch tool and hammer to remove the back bearing. Take note of the alignment rod present, remove it and keep it properly. Keep the gasket at the bottom of the plate carefully. Remove the plate at the back by removing the nuts with a 4mm align key. Take the air impact wrench and remove its rubber jacket if it has any. The air impact wrench in such a scenario makes absurd clicking sounds when you use it and also does not give a smooth performance. Castrol SAE 30 motor oil can suit this purpose.Īs the impact wrench gets old, the oil evaporates due to the heat and also gets contaminated with small metal chips, resulting in your air impact wrench not giving the optimum performance.
Husky airtool oil how to#
Learn how to oil impact wrench using this step by step tutorial. Since there are rotating parts in your wrench, they need to lubricated properly to give you a smooth performance. Most impact guns come oiled from the manufacturer when you buy it. An air impact wrench loosens them with ease and gives you the result in seconds. Tight, rusted bolts are very tedious to work upon. Air impact wrenches are very handy tools both for home maintenance tasks and for your workshop.
0 kommentar(er)
